
In a recent tunneling project through soft clay and weathered rock, engineers faced significant challenges in stabilizing the tunnel face and preventing collapses. Traditional drilling and anchoring methods required multiple steps and often caused delays. However, by deploying SupAnchor's SupFRP® GFRP SDA Bolt, the contractor was able to drill, grout, and anchor in a single operation, dramatically improving efficiency and safety. This self drilling anchor system is now gaining attention across the industry for its ability to handle difficult ground conditions while offering high performance and durability.
The SupFRP® GFRP SDA Bolt is a glass fiber reinforced polymer (GFRP) self drilling anchor bolt designed for permanent applications. It features a central hole that allows water flushing during drilling and subsequent grout injection, making it a true hollow bar anchor. Its unique waved thread structure and ISO standard profiles (R25, R28, R32, R38) ensure compatibility with standard drilling equipment and high torque transmission. Unlike steel anchors, the GFRP material is lightweight yet extremely strong, and its cuttability protects tunnel boring machines (TBMs) and roadheaders from damage when drifting or enlarging tunnels.
The SupFRP® GFRP SDA Bolt is available in four diameters, each tailored to specific load requirements. The table below summarizes key technical parameters:
| Model | Outside Diameter (mm) | Internal Diameter (mm) | Cross-sectional Area (mm²) | Guaranteed Tensile Load (kN) | Torsion Strength (Nm) | Weight (kg/m) | Thread Type (ISO) |
|---|---|---|---|---|---|---|---|
| H25S | 25 | 12 | 250 | 220 | 180 | 0.63 | R25 |
| H28S | 28 | 14 | 310 | 280 | 250 | 0.86 | R28 |
| H32S | 32 | 15 | 400 | 365 | 360 | 0.99 | R32 |
| H38S | 38 | 20 | 540 | 490 | 450 | 1.33 | R38 |
These specifications demonstrate the product's high tensile capacity and torsional strength, which are essential for demanding geotechnical reinforcement systems. The guaranteed tensile loads range from 220 kN to 490 kN, allowing engineers to select the appropriate size based on the required support pressure. The high torsion strength (up to 450 Nm) ensures the anchor can withstand the rotational forces during drilling and installation without failure. The lightweight nature of GFRP (weights from 0.63 to 1.33 kg/m) reduces handling effort and transportation costs while still providing excellent load-bearing capacity.
Additionally, the central hole serves a dual purpose: it allows water flushing to cool the drill bit and remove cuttings during drilling, and later acts as a conduit for grout injection. This integrated drill-and-grout bolt design eliminates the need for separate casing or pre-drilled holes, significantly accelerating installation times. The grout then bonds the anchor to the surrounding ground, creating a robust composite reinforcement.
The SupFRP® GFRP SDA Bolt is engineered for a wide range of applications where ground conditions are unstable or where traditional methods fail. Key application areas include:
One of the standout features is the anchor's cuttability. Because the bolt is made of GFRP rather than steel, it can be easily cut by excavation machinery. This is particularly valuable when tunnels are later enlarged or when a TBM encounters previously installed anchors. Instead of damaging the cutting tools, the machine can slice through the bolt, reducing downtime and maintenance costs.
The global demand for advanced geotechnical reinforcement systems is rising, driven by increased infrastructure development, urbanization, and the need for safer underground construction. Traditional steel anchors are prone to corrosion, especially in aggressive environments, leading to long-term durability concerns. GFRP anchors, such as the SupFRP® SDA Bolt, offer excellent corrosion resistance, making them suitable for permanent applications in marine, chemical, or high-humidity environments. This extends the service life of structures and reduces maintenance costs.
Moreover, the integration of drilling, grouting, and anchoring into one product aligns with the industry trend toward faster construction and reduced labor. Contractors can achieve higher installation rates, especially in remote or difficult-to-access sites. The hollow bar anchor design also allows for better grout distribution, ensuring full encapsulation and enhanced bond strength.
For slope stabilization and soil nailing, the system provides a reliable alternative to conventional methods. The self drilling anchor bolt can be installed in a single pass, even in collapsing boreholes where casing would normally be required. This makes it a cost-effective solution for emergency slope repairs and landslide mitigation.
SupAnchor has established itself as a leading manufacturer in the ground anchoring industry, with a strong focus on research and development. The SupFRP® GFRP SDA Bolt is the result of years of engineering expertise and feedback from global projects. The company adheres to ISO standards in both thread profiles and manufacturing processes, ensuring consistent quality and compatibility with international equipment.
SupAnchor's global presence includes partnerships with contractors and engineering firms across Europe, North America, and Asia. Their products are used in major infrastructure projects, including tunnels, mines, and highways, demonstrating their reliability in diverse geological conditions. By offering innovative solutions like the GFRP self drilling anchor system, SupAnchor continues to meet the evolving needs of the geotechnical industry.

For engineers and project managers seeking a high-performance, durable, and efficient anchoring solution, the SupFRP® GFRP SDA Bolt represents a significant advancement. Its combination of technical excellence, ease of use, and long-term reliability makes it a valuable tool for any geotechnical project.
SupAnchor's self drilling anchor system proves effective in challenging geological conditions for a major mountain highway project, ensuring slope stability and construction efficiency.
SupAnchor's SupFRP® GFRP SDA Bolt integrates drilling, grouting, and anchoring for efficient ground support. Discover its technical specs and applications in tunneling and slope stabilization.
SupAnchor introduces SupPump SDA grout pumps Sup2000 and Sup5000, delivering high-pressure, variable-rate grouting for tunnels, mining, and slope stabilization projects worldwide.
SupAnchor's advanced self drilling anchor system deployed in challenging ground conditions, demonstrating superior geotechnical reinforcement for slope stabilization and foundation support.
SupAnchor introduces SupHulk friction rock bolts with PM series offering 110-240 kN breaking loads, ideal for mining and tunneling reinforcement.